6 sonuçtan 1 ile 6 arası

Konu: Server Down Olması .Acill!!

  1. #1

    Standart Server Down Olması .Acill!!

    Merhaba win 2003 sp1 exc2003 sp2 olan bir sistem kendiliğinden down olmuş durumda.Event log a düşen hatalar aşağıda.Neden olduğuna ve ne yapılması gerektiğine dair yardımcı olursanız sevinirim.Teşekkürler

    Source : MSExchangeDSAccess
    Category : Topology
    Event ID : 2102
    Process MAD.EXE (PID=2480). All Domain Controller Servers in use are not responding:
    serverismi.domain.local


    Source : MSExchangeAL
    Category : LDAP Operations
    Event ID : 8026


    LDAP Bind was unsuccessful on directory fabekssrv.FABEKS.local for distinguished name ''. Directory returned error:[0x51] Server Down.





    Source : MSExchangeAL
    Category : Service Control
    Event ID : 8250


    The Win32 API call 'DsGetDCNameW' returned error code [0x862] The specified component could not be found in the configuration information. The service could not be initialized. Make sure that the operating system was installed properly.
     

  2. #2

    Standart Ynt: Server Down Olması .Acill!!

    Merhaba,

    Exchange, DC uzerinde calisiyor ve aslinda kendi uzerindeki hizmetler ile iletisim kuramadigi icin 2102 ve 8026 ID lerini veriyor. Yani asil sorun bu ID ler degil.

    1. Troubleshoot icin ilk olarak makine uzerinde \\127.0.0.1 seklinde kendine ulasabliyor mu?
    2. Makine uzerindeki antivirus ve benzeri yazilimlar msconfig ile tamamen disable edilerek sistem restart edildiginde durum nedir?
    3. Makine uzerinde ki servisler (netlogon, server, workstation...) durumu nedir?
    4. Asgida yer alan makaledeki adimlar a goz atmakta fayda olabilir (eger asil sorun exchange in global gatalog a erisememesi gibi bir durumsa)

    Exchange 2000 Server'da Exchange Enterprise Servers grubundan "Denetim ve güvenlik günlüklerini yönet" izni kaldırıldığında oluşabilecek sorunlar
    http://support.microsoft.com/?id=896703

    Emre.
    Emre Aydın
    MVP | Office 365 | Since 2006
    MCT | Since 2005
    MCSD | Azure Solutions Architect
    MCSE | Private Cloud, Messaging, Communication, Server Infrastructure, Productivity, Platform
    MCSA | Office 365, Server 2012, Cloud Platform
    MCTS | Developing Azure Solutions, Implementing Azure Infrastructure, Architecting Microsoft Azure Solutions, SAM
    P-Seller
    Intelligent Cloud | EMS
    Web : www.mshowto.org
    Mail : emre.aydin [@] mshowto.org
    Twitter : https://twitter.com/emreaydn
    Linkedin : tr.linkedin.com/in/emreaydn

  3. #3

    Standart Ynt: Server Down Olması .Acill!!

    Hocam söyledikleriniziin hepsi normal.Ve exchange ile ilgili hiçbirşey yapılmadı.yani herşey normalken bu hatalar oluştu.
     

  4. #4

    Standart Ynt: Server Down Olması .Acill!!

    Merhaba tekrar,

    Biraz arastirdim konuyu. Sistemin kapanmasi esnasinda bazi servislerin erken kapanmasi sonucu bu durum olusabiliyor (Ornegin DNS) Sistemin calismasi ile ilgili su anda bir sorun yasaniyor mu? (yasanmamasi gerekiyor) Ayrica asagidaki makalede bahsi gecen islemleri gerceklestirirseniz sistem acilisinda event log a daha detayli bilgi yazaccaktir.

    How To Enable Verbose Startup, Shutdown, Logon, and Logoff Status Messages in the Windows Server 2003 Family
    http://support.microsoft.com/default...uct=winsvr2003

    SUMMARY
    This article describes how to configure Windows so that you receive verbose startup, shutdown, logon, and logoff status messages. Verbose status messages may be helpful when you are troubleshooting slow startup, shutdown, logon, or logoff behavior.
    Back to the top

    How to enable verbose startup, shutdown, logon, and logoff status messages
    You can enable verbose status messages by using Group Policy Object Editor or by editing the Windows registry.
    To enable verbose status messages by using Group Policy Object Editor
    To enable verbose status messages by using Group Policy Object Editor, use the method that is appropriate to your situation:
    In a domain environment
    If you are in a domain environment and you want to enable verbose status messages on a group of computers, follow these steps: 1. Click Start, point to Administrative Tools, and then click Active Directory Users and Computers.
    2. Right-click the container for the domain or the organizational unit to which you want to apply the policy settings, and then click Properties.
    3. Click the Group Policy tab.
    4. Click New, and then type a descriptive name for the new Group Policy object (GPO).
    5. Click the new GPO that you created, and then click Edit.
    6. Expand Computer Configuration, expand Administrative Templates, and then click System.
    7. In the right pane, double-click Verbose vs normal status messages.
    8. Click Enabled, and then click OK.
    9. Close Group Policy Object Editor, click OK, and then quit Active Directory Users and Computers.
    Note Windows ignores this setting if the Remove Boot / Shutdown / Logon / Logoff status messages setting is turned on.
    On a stand-alone computer or a single computer
    If you are using a stand-alone computer or if you want to enable verbose status messages on only one computer, follow these steps: 1. Click Start, and then click Run.
    2. In the Open box, type gpedit.msc, and then click OK.
    3. Expand Computer Configuration, expand Administrative Templates, and then click System.
    4. In the right pane, double-click Verbose vs normal status messages.
    5. Click Enabled, and then click OK.
    6. Close Group Policy Object Editor, click OK, and then quit Active Directory Users and Computers.
    Note Windows ignores this setting if the Remove Boot / Shutdown / Logon / Logoff status messages setting is turned on.
    To enable verbose status messages by using Registry Editor
    Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

    To use enable verbose status messages by editing the registry, follow these steps: 1. Click Start, and then click Run.
    2. In the Open box, type regedit, and then click OK.
    3. Locate and then click the following registry key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Policies\System
    4. On the Edit menu, point to New, and then click DWORD Value.
    5. Type verbosestatus, and then press ENTER.
    6. Double-click the new key that you created, type 1 in the Value data box, and then click OK.
    7. Quit Registry Editor.
    Note Windows does not display status messages if the following key is present and the value is set to 1:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Policies\System\DisableStatusMessages


    Kolay gelsin,

    Emre.
    Emre Aydın
    MVP | Office 365 | Since 2006
    MCT | Since 2005
    MCSD | Azure Solutions Architect
    MCSE | Private Cloud, Messaging, Communication, Server Infrastructure, Productivity, Platform
    MCSA | Office 365, Server 2012, Cloud Platform
    MCTS | Developing Azure Solutions, Implementing Azure Infrastructure, Architecting Microsoft Azure Solutions, SAM
    P-Seller
    Intelligent Cloud | EMS
    Web : www.mshowto.org
    Mail : emre.aydin [@] mshowto.org
    Twitter : https://twitter.com/emreaydn
    Linkedin : tr.linkedin.com/in/emreaydn

  5. #5

    Standart Ynt: Server Down Olması .Acill!!

    Hocam çok teşekkür ederim.Emeğine sağlık
     

  6. #6

    Standart Ynt: Server Down Olması .Acill!!

    Rica ederim,

    Emre.
    Emre Aydın
    MVP | Office 365 | Since 2006
    MCT | Since 2005
    MCSD | Azure Solutions Architect
    MCSE | Private Cloud, Messaging, Communication, Server Infrastructure, Productivity, Platform
    MCSA | Office 365, Server 2012, Cloud Platform
    MCTS | Developing Azure Solutions, Implementing Azure Infrastructure, Architecting Microsoft Azure Solutions, SAM
    P-Seller
    Intelligent Cloud | EMS
    Web : www.mshowto.org
    Mail : emre.aydin [@] mshowto.org
    Twitter : https://twitter.com/emreaydn
    Linkedin : tr.linkedin.com/in/emreaydn

Benzer Konular

  1. Cevaplar: 8
    Son Mesaj: 12-28-2009, 03:54 PM
  2. Information store durdu ve açılmıyorrr!!!!!!! ACILL
    By alper_kaynak in forum Exchange Server
    Cevaplar: 2
    Son Mesaj: 10-01-2007, 03:26 PM

Yetkileriniz

  • Konu Açma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok
  •  
Hakkımızda
MSHOWTO, herhangi bir firma ya da kuruluş ile bağı olmayan bağımsız teknik bir topluluktur.
Sosyal Medya Linklerimiz