Merhaba,


ESX host?larımızı 4.0?dan 4.1?e CLI ile upgrade işlemini nasıl yapabiliriz?

Öncelikle bu işlem için aşağıdaki iki component?i download etmemiz gerekiyor;
pre-upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip
upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip


Gerekli component?leri aşağıdaki link?ten download edebilirsiniz;
http://downloads.vmware.com/d/details/esx41/ZHcqYmRoaGViZHdlZQ==#version_history

Yapılması gereken işlemler sırasıyla;
1. İki dosyayıda ESX host Service Console?a yükleyin
2. Host?u maintenance mode?a alın
3. esxupdate komutunu pre-upgrade ile çalıştırın
4. esxupdate komutunu upgrade ile çalıştırın
5. ESX host?u reboot edin
6. Maintenance mode?dan çıkış
Bu işlemlerin ayrıntıları;
1. Host?u maintenance mode?a alın
vimsh -n -e /hostsvc/maintenance_mode_enter
2. Esxupdate komutunu pre-upgrade ile çalıştırın
esxupdate update --bundle=pre-upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip
Bu komutu kullandığınızda aşağıdaki gibi bir çıktı görmeniz gerekiyor
pre-upgrade-from-ESX4.0-to-4.1.0-0.0.26024.. #################################### [100%]
Unpacking vmware-esx-esxupdate-4.1.0-0.0.2.. #################################### [100%]
Unpacking vmware-esx-uwlibs-4.1.0-0.0.2602.. #################################### [100%]
Unpacking glibc-common-2.5-34.2926.vmw.x86.. #################################### [100%]
Unpacking glibc-2.5-34.2926.vmw.x86_64.vib #################################### [100%]
Unpacking glibc-2.5-34.2926.vmw.i686.vib #################################### [100%]
Installing glibc-common #################################### [100%]
Installing glibc #################################### [100%]
Installing glibc #################################### [100%]
Installing vmware-esx-uwlibs #################################### [100%]
Installing vmware-esx-esxupdate #################################### [100%]
Cleaning up vmware-esx-esxupdate #################################### [100%]
Cleaning up vmware-esx-uwlibs #################################### [100%]
Cleaning up glibc-common #################################### [100%]
Cleaning up glibc #################################### [100%]
Cleaning up glibc #################################### [100%]


3. Esxupdate komutunu upgrade ile çalıştırın
esxupdate update --bundle=upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip
Bu komutu kullandığınızda aşağıdaki gibi bir çıktı görmeniz gerekiyor
Host was not updated, no changes required.
Skipping bulletin ESX410-GA-esxupdate; it is installed or obsoleted.
Unpacking rpm_vmware-esx-likewise-ad.. ########################################## [100%]
... lots of updated RPM packages ...
Cleaning up nss_ldap ########################################## [100%]

Running [/usr/sbin/cim-install.sh]...
ok.
Running [/usr/sbin/vmkmod-install.sh]...
ok.
Running [esxcfg-boot -b]...
ok.
The update completed successfully, but the system needs to be rebooted for the
changes to be effective.

4. ESX host?u reboot edin
reboot
5. Maintenance mode?dan çıkış
vimsh -n -e /hostsvc/maintenance_mode_exit

Bu işlemler sonrasında ESX Host?umuzu başarıyla ESX 4.1?e upgrade etmiş olduk.