7 sonuçtan 1 ile 7 arası

Konu: Public Folderda kendi kendine değişen öğeler

  1. #1

    Standart Public Folderda kendi kendine değişen öğeler

    Merhaba

    Hemen konuya girmek istiyorum. Ortak klasörlerimiz (Public Folder) altında bulunan öğelerde (adres kartları) değiştirme tarihine baktığımızda böylebir değişiklik yapılmadığı halde farklı kullanıcılar tarafından hergün dakikada 60-70 civarında öğede değişiklik yapıldığını görüyoruz.
    Konuyu daha iyi anlatacağını düşündüğüm ekran görüntüsünün linkini
    aşağıda bulabilirsiniz.
    http://www.teknikdokum.com/public.jpg

    Ortak klasörlerde yani public folderda
    bu öğeleri kullanıcı değiştirmediği halde değişmiş gibi gözüküyor.
    İlk önce bu konu ile ilgili Exchange service pack 2 tekrar geçildi.
    Ardından "eseutil /d" yapıldı.

    ESM içerisinde sunucumuzun özelliklerinde bulunan Diagnostic Logging sekmesinde MSExchangeIS altında bulunan Public için logging seviyesini sağ tarafta gelen tüm alt değerler için maximum yaptım.Ondan sonra evet log olarak aşağıdaki uyarı düşmeye başladı.

    -----------------------------------------------------------------------------------------------------
    Kaynak: MSExchangeIS Public Store
    Kategori: Access Control
    Olay Kimliği: 1030

    silva@teknikdokum.com failed an operation on folder /O=TEKNIKDOKUM/OU=FIRST ADMINISTRATIVE GROUP/CN=RECIPIENTS/CN=OAB VERSION 3A4D53DA844C2705BFADA4D79B4498747C002721 on database "First Storage Group\Public Folder Store (ANA)" because the user did not have the following access rights:

    'Delete' 'Read Property' 'Write Property' 'Create Message' 'View Item' 'Create Subfolder' 'Write Security Descriptor' 'Write Owner' 'Read Security Descriptor' 'Contact'

    The entry ID of the folder is in the data section of this event.
    -----------------------------------------------------------------------------------------------------
    Uyarıyı araştırdım.
    http://support.microsoft.com/default.aspx/kb/313866
    Gösterdiği yere baktım fakat everyone grubu tüm haklara sahip görünüyor.
    Makalede Everyone grubu için sadece aşağıdaki özelliklere sahip olası gerektiğimi söyleniyor.
    • Create named properties in the information store
    • Create public folder
    • Create top level public folder

    Problem hala devam ediyor. başka bir öneriniz var mı?
    teşekkürler

    KAĞAN GENÇ
    BİLGİ İŞLEM SORUMLUSU
    TEKNİK DÖKÜM A.Ş.
    Peykhane Sk. Büyük Birol İşhanı No:8/1
    34126 Çemberlitaş İstanbul Türkiye
    Tel : 0212 518 57 57
    Faks : 0212 638 33 13
    www.teknikdokum.com
     

  2. #2

    Standart Ynt: Public Folderda kendi kendine değişen öğeler

    Merhaba,

    Bu public folder baska bir server ile replicate olmaya calisiyor mu?

    Emre
    Emre Aydın
    MVP | Office 365 | Since 2006
    MCT | Since 2005
    MCSD | Azure Solutions Architect
    MCSE | Private Cloud, Messaging, Communication, Server Infrastructure, Productivity, Platform
    MCSA | Office 365, Server 2012, Cloud Platform
    MCTS | Developing Azure Solutions, Implementing Azure Infrastructure, Architecting Microsoft Azure Solutions, SAM
    P-Seller
    Intelligent Cloud | EMS
    Web : www.mshowto.org
    Mail : emre.aydin [@] mshowto.org
    Twitter : https://twitter.com/emreaydn
    Linkedin : tr.linkedin.com/in/emreaydn

  3. #3

    Standart Ynt: Public Folderda kendi kendine değişen öğeler

    Merhaba Emre bey

    Hayır replicate olmaya çalışmıyor. Tek bir server (Small Business SErver 2003) üzerine kurulu Exchange 2003 var. "Replication" serviside devre dışı.

    KAĞAN
     

  4. #4

    Standart Ynt: Public Folderda kendi kendine değişen öğeler

    Selamlar,

    Biraz arastirdim ama cozum hep ayni makaleye cikiyor,

    RESOLUTION
    To resolve this issue, configure the permissions correctly. To do so, you have to use the ADSI Edit snap-in.

    WARNING: If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows 2000 Server, Microsoft Exchange 2000 Server, or both. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes at your own risk.

    To configure the permissions: 1. Start ADSI Edit. In the CN=Configuration container, locate the following container (where ORGANIZATION is the name of your Exchange 2000 or Exchange 2003 organization and administrative_group is the name of your administrative group):
    CN=Services,CN=Microsoft Exchange,CN=ORGANIZATION,CN=Administrative Groups,CN=administrative_group,CN=Folder Hierarchies,CN=Public Folders
    2. Right-click CN=Public Folders, and then click Properties.
    3. Click the Security tab.
    4. Make sure that the Allow inheritable permissions from parent to propagate to this object check box is selected.
    5. Make sure that the Everyone group has the following Allow permissions:

    • Create named properties in the information store
    • Create public folder
    • Create top level public folder
    If the Allow inheritable permissions from parent to propagate to this object check box is selected, the Everyone group should already have these permissions. Make sure that the Deny check boxes are not selected.

    Kolay gelsin,

    Emre.
    Emre Aydın
    MVP | Office 365 | Since 2006
    MCT | Since 2005
    MCSD | Azure Solutions Architect
    MCSE | Private Cloud, Messaging, Communication, Server Infrastructure, Productivity, Platform
    MCSA | Office 365, Server 2012, Cloud Platform
    MCTS | Developing Azure Solutions, Implementing Azure Infrastructure, Architecting Microsoft Azure Solutions, SAM
    P-Seller
    Intelligent Cloud | EMS
    Web : www.mshowto.org
    Mail : emre.aydin [@] mshowto.org
    Twitter : https://twitter.com/emreaydn
    Linkedin : tr.linkedin.com/in/emreaydn

  5. #5

    Standart Ynt: Public Folderda kendi kendine değişen öğeler

    MErhaba,

    Emre bey peki çözüm sizce bu mudur? ve Makalede Everyone grubu için sadece aşağıdaki özelliklere sahip olması gerektiğimi söyleniyor.

    Teşekkürler
     

  6. #6

    Standart Ynt: Public Folderda kendi kendine değişen öğeler

    Merhaba,

    İşlemi adsiedit uzerinden gercekleştirmek gerekiyor. Ayrica everyone grubu icin asagidaki izinlerin yada haklarin tum alt klasorlere uygulanmasi icin inheritance in tepeden uygulanmasi gerekiyor.

    Kolay gelsin,

    Emre.
    Emre Aydın
    MVP | Office 365 | Since 2006
    MCT | Since 2005
    MCSD | Azure Solutions Architect
    MCSE | Private Cloud, Messaging, Communication, Server Infrastructure, Productivity, Platform
    MCSA | Office 365, Server 2012, Cloud Platform
    MCTS | Developing Azure Solutions, Implementing Azure Infrastructure, Architecting Microsoft Azure Solutions, SAM
    P-Seller
    Intelligent Cloud | EMS
    Web : www.mshowto.org
    Mail : emre.aydin [@] mshowto.org
    Twitter : https://twitter.com/emreaydn
    Linkedin : tr.linkedin.com/in/emreaydn

  7. #7

    Standart Ynt: Public Folderda kendi kendine değişen öğeler

    MErhaba,

    yaptım ama değişen bişey yok. Problem devam ediyor.

    http://www.teknikdokum.com/publictomo.jpg

    KAĞAN
     

Benzer Konular

  1. Cevaplar: 7
    Son Mesaj: 12-30-2009, 05:17 PM
  2. Geri dönüşüm kutusunda silinmiş öğeler simgesi gözükmüyor.
    By abdulkadirtophan in forum Microsoft Windows
    Cevaplar: 0
    Son Mesaj: 09-11-2007, 03:06 AM
  3. DNS kaydinin kendi kendine silinmesi
    By santa in forum Server2003
    Cevaplar: 5
    Son Mesaj: 08-28-2007, 06:10 PM
  4. Cevaplar: 1
    Son Mesaj: 09-14-2006, 03:42 PM
  5. Cevaplar: 1
    Son Mesaj: 08-22-2006, 02:30 PM

Yetkileriniz

  • Konu Açma Yetkiniz Yok
  • Cevap Yazma Yetkiniz Yok
  • Eklenti Yükleme Yetkiniz Yok
  • Mesajınızı Değiştirme Yetkiniz Yok
  •  
Hakkımızda
MSHOWTO, herhangi bir firma ya da kuruluş ile bağı olmayan bağımsız teknik bir topluluktur.
Sosyal Medya Linklerimiz