sccm windows updateleri alamıyor

[akulak]

merhaba test amaçlı sanal sccm serverım var,clientları görüyor o tarafta bir sıkıntı görünmüyor. 10.10.10.* ipler i var
adsl ortamında 192.168.1.* li ip var. sanal serverlara ikinci eth olarak bu iplerden verdik,sanallar internete çıkabiliyor fakat sccm server windows updateleri security pathcleri almak için sürekli deneme yapıyor fakat waitin for 60 minutes for request diye bekliyor. önerileirnizi bekliyorum
teşekkürler

[emreaydin]

Merhaba,

SCCM Server'in ethernet kartlarindan External a bakan'daki default gateway yazmak yerine Internal 'daki karta Default gateway yazarak deneyebilir miyiz?

Emre.

[akulak]

Emre Bey
öncelikle teşekkürler
sorun component configuration -->Software Update Point Component -->General de Active sofware update point on site server seçenğini işaretleyince düzeldi.
fakat bu sefer sync failed . wsus server not configured. source :cwsyncmgr::dosync hatası alıyorum
düzenli olarak sync denemsi yapıyor

[emreaydin]

Suna bakbilir miyiz?

WSUS Server Not Configured Error
WSUS Synchronization Manager fails to connect to the WSUS server to initiate synchronization with the message WSUS server not configured. The status message described in the following table is created.


Message ID Description
6703
SMS WSUS Synchronization failed. Message: WSUS server not configured. Source: CWSyncMgr:oSync. The operating system reported error 2147500037: Unspecified error


WSUS Synchronization Manager writes log entries to wsyncmgr.log in <ConfigMgrInstallationFolder>\Logs similar to the following:

Performing sync on regular schedule

STATMSG: ID=6701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=<ComputerName> SITE=<SiteCode> PID=5364 TID=5220 GMTDATE=<Date & Time> ISTR0="" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0

Sync failed: WSUS server not configured. Source: CWSyncMgr:oSync

STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=<ComputerName> SITE=<SiteCode> PID=5364 TID=5220 GMTDATE=<Date & Time> ISTR0="CWSyncMgr:oSync" ISTR1="WSUS server not configured" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0

Sync failed. Will retry in 60 minutes

Sync time: 0d00h05m01s

Possible Solutions
Following are possible solutions for the WSUS server not configured error:

Check the port settings configured for the active software update point, and make sure they are the same as the port settings configured for the Web site used by WSUS running on the active software update point. For more information, see How to Determine the Port Settings Used by WSUS.


Check to make sure the fully qualified domain name (FQDN) for the active software update point site system server is correct. For more information, see How to Verify the Fully Qualified Domain Name Settings Used By the Active Software Update Point.


When the Configuration Manager site is in native mode, the WSUS Web site and virtual directories must be configured for Secure Sockets Layer (SSL) because the active software update point is automatically configured to use SSL, but WSUS is not automatically configured. When a Configuration Manager site is in mixed mode, you have the option to configure the active software update point to use SSL. In both cases, you must manually configure the WSUS Web site and virtual directories. For more information, see How to Configure the WSUS Web Site to Use SSL.


Check to make sure that WSUS running on the active software update point for the child primary site is not configured to be a replica. The following procedure provides the steps to check whether WSUS is configured to be a replica.

[akulak]

tekrar merhaba
wsus 3.0 sp1 kurdum şu anda sync işlemi devam ediyor. işlemin sonrasında sccm de update listler gelecekmidir yoksa bu işlem sonrasında herhangi bir ayar yapmam gerekecekmi?
teşekkürler

[emreaydin]

otomatik gelmesi gerekli